Steel Ore Industrial 6306 Metal Conveyor Rollers High Hardness

Steel Ore Industrial 6306 Metal Conveyor Rollers High Hardness

Conveyor Steel Carrying Return Idler Rollers for Sale for Steel Ore Industrial Supply​

Typical application for the rollers are: mines, quarries, cement plants, coal-fired power plants, port installations. The effectiveness of the HDPE roller system provides the solution to the environmental challenges of dust, dirt, water, low and high temperatures or applications where there is a large temperature gap between day and night. The working temperature, with standard greased components is defined as between -100°C and + 80°C. It is possible to reach temperatures outside of this range using special grease, bearings and seals.

HDPE roller idlers for self cleaning used on the transom to support the belt when the material being conveyed, performs a cleaning action and reduces the tendency of material to deposit itself and stick to the surface of the dirty side of the belt. They may be employed on any part of the return belt section in the case of short conveyors. On long sections it is satisfactory to employ these rollers only up to the point where the material does not adhere any more to the belt surface. These rollers should not be employed as snub rollers adjacent to the drive or return drums.

Characteristics for Transport Roller

1. High-wear resistance seven times wear resistance than steel, four times than PTFE.
2. High impact resistancetwo times impact resistance than PC, five times than ABS.
3. Self-lubrication the same as PTFE, better than steel and brass appended lubricating oil.
4. Anti-corrosion resistance,stable chemicals property and can endure the corrosion of all kinds of corrosive medium and organic solvent in certain rang of temperature and humidity.
5. Non-sticking the smooth surface of product hardly affixes other material.
6. Low temperature resistancein (-196), it still has the prolongation and high tensile strength.
7. Non-toxic and clean property.

steel conveyor roller parameter

Product Overview

Conveyor roller is an important part of the belt conveyor. There are many types and large quantities of rollers, which can support the weight of the conveyor belt and the material been conveyed. The roller accounts for 35% of the total cost of a belt conveyor and generates more than 70% resistance, and plays a key role to extend the life of the conveyor belt, so the quality of the roller is particularly important.

Product Features At A Glance

1. Strong hardness and high wear resistance;

2. Good Sealing Performance - the carrying roller is fully sealed, and both ends are equipped with labyrinth seals, oil and grease will not leak, which can make the roller runs under a fully sealing state;

3. Long Service Life - the carrying roller can reduce belt wear, keep the belt run in its track, and extends the belt life;

4. Low Operating Cost - carrying rollers can reduce the overall cost of belt conveyors and reduce maintenance man-hours.